Custom Bimetal Bearings & Bushings Manufacturer
JEDBUSHING manufactures custom bimetal bearings, steel-backed bronze bushings and composite sliding parts according to drawings or samples.
We support structure review, material confirmation, machining, oil grooves and inspection for finished bimetal bearing parts.
Bimetal Bearings Made to Your Drawing
JEDBUSHING produces custom bimetal bearings and steel-backed bronze bushings in different structures according to drawings, samples and application requirements.
- Bimetal Sleeve Bushings: Steel-backed bronze sleeve bushings for shafts, pins and sliding positions.
- Flanged Bimetal Bushings: Custom flange size, wall thickness, grooves and fitting dimensions.
- Bimetal Thrust Washers: Composite thrust washers for axial support and wear protection.
- Bimetal Strips and Plates: Steel-bronze composite strips or plates for sliding and wear surfaces.
- Custom Composite Bearing Parts: Non-standard bimetal parts machined from drawing or sample.
Materials, Structure & Machining
Bimetal bearings can be produced with different steel-backed copper alloy structures. The final material and structure should be confirmed according to the drawing, load, speed, lubrication condition, shaft material and working environment.
| Structure / Material | Typical Use |
|---|---|
| Steel + Bronze Alloy Layer | Common bimetal bushings for sliding and bearing positions |
| Steel + Lead Bronze Layer | Used where low friction and embedding ability are required |
| Steel + Lead-Free Bronze Layer | Selected when lead-free or special project requirements apply |
| Bimetal Thrust Washer Structure | For axial support and wear protection |
| Custom Composite Bearing Parts | Made according to drawing, sample or working condition |
Send Your Drawing for Quote
Have a drawing, sample or basic size? Send it to JEDBUSHING and we will check the material, structure and machining details for quotation.
No drawing yet?
Send photos and measurements first. We will tell you what is needed next.
Get a Quote
FAQ
Yes. JEDBUSHING manufactures custom bimetal bearings, steel-backed bronze bushings, thrust washers and composite sliding parts according to drawings, samples or working conditions.
A bimetal bearing usually has a steel backing and a bronze or copper alloy sliding layer. This structure combines backing strength with a sliding surface for bearing applications.
Not exactly. A solid bronze bushing is made from bronze alloy, while a bimetal bearing uses a composite structure, usually steel backing with a bronze or copper alloy layer.
Yes. JEDBUSHING can manufacture bimetal sleeve bushings, flanged bushings, thrust washers, strips, plates and custom composite bearing parts according to your drawing.
Please send the drawing, material requirement, quantity, wall thickness, tolerance, lubrication condition and working environment. If there is no drawing, photos and measurements can be sent first.
Yes. JEDBUSHING can provide dimensional inspection, material certificates, inspection reports and shipment photos when required.
