Tin Bronze Bushings Manufacturer
JEDBUSHING manufactures custom tin bronze bushings for heavy-load, low-speed and wear-resistant applications. We produce sleeve bushings, flanged bushings, thrust washers and special bronze wear parts according to drawings or samples.
We can also customize oil grooves, oil holes, graphite plugs, flanges and tolerances for your equipment.
Since 1998
Bronze bushing manufacturing experience
1,500 Tons / Year
Casting and machining capacity
Ø5000 × 1000 mm
Large-size bronze bushing capability
Two Large CMMs
Dimensional inspection support
CCS Approval
Cast copper alloy approval for applicable projects
Tin Bronze Bushings Made to Your Drawing
JEDBUSHING manufactures tin bronze bushings in different structures according to customer drawings, samples and working conditions.
Sleeve Bushings
Flanged Bushings
Thrust Washers and Wear Plates
Graphite Plugged Tin Bronze Bushings
Custom Bronze Wear Parts
Built for Heavy-Load, Low-Speed Wear Conditions
Tin bronze bushings are often used when the part must carry load, resist wear and protect the shaft under repeated sliding movement.
These parts are commonly used in hydraulic equipment, wind power systems, mining machinery, cement equipment and hydroelectric units where load, wear and lubrication conditions must be considered.
If you are not sure whether tin bronze is the right material, send us the drawing and working conditions.
Quality Inspection Support
For custom tin bronze bushings, we check key dimensions according to your drawing, including ID, OD, length, flange size, oil grooves and oil holes.
For strict tolerance parts, CMM inspection can be used to confirm important fitting dimensions before shipment. Material certificates and inspection reports can also be provided when required.
Tin Bronze Grades and Custom Machining Options
| Material / Grade | Typical Use |
|---|---|
| C93200 / SAE 660 | Common bearing bronze for bushings, washers and wear parts |
| C90500 | High-strength tin bronze for heavy-load components |
| C90700 | Tin bronze option for strength and wear resistance |
| C90800 | Used for demanding bushing and bearing applications |
| CuSn10 / CuSn12 | Common tin bronze options for custom bushings |
| Custom Tin Bronze Alloys | Selected according to drawing or working condition |
Send Your Tin Bronze Bushing Drawing
Have a drawing, sample or basic size? Send it to JEDBUSHING and we will check the material, structure and machining details for quotation.
No drawing yet?
Send photos and measurements first. We will tell you what is needed next.
Get a Tin Bronze Bushing Quote
FAQ
Yes. JEDBUSHING manufactures tin bronze bushings according to customer drawings, samples or working conditions. We can produce sleeve bushings, flanged bushings, thrust washers, wear plates and special bronze parts with custom machining details.
We are a custom bronze bushing manufacturer. Our focus is finished and machined tin bronze bushings, not only raw bronze bars or plates. We can help produce parts according to drawings, samples and application requirements.
Yes. If the drawing does not specify a material, we can review the load, speed, lubrication method, shaft material, temperature and working environment before discussing suitable tin bronze material options.
Common options include C93200 / SAE 660, C90500, C90700, C90800, CuSn10, CuSn12 and related tin bronze alloys. Final selection depends on the drawing, working condition and production feasibility.
Yes. We can machine straight grooves, spiral grooves, oil holes, flanges, chamfers, graphite plug holes and other custom details according to your drawing or assembly requirements.
Our main focus is custom bronze bushings. If you need standard sizes, you can still send the dimensions, material and quantity. We will check whether the part can be produced according to your requirement.
